常温直接沉淀法制备ZnO纳米棒

在常温下, 以PEG-400(聚乙二醇400)为表面活性剂, 采用直接沉淀法合成了ZnO纳米棒. 产物用XRD, TEM, SAED和 HRTEM等进行了表征. 结果表明, 所得ZnO为一维的纳米棒, 属于六方纤维矿的单晶结构. ZnO纳米棒的直径在20~40 nm之间, 长度在300~800 nm范围. (0001)面为ZnO纳米棒的生长方向. 讨论了ZnO相的生成和ZnO纳米棒的形成机理以及PEG-400在其形成过程中的作用.     

TiO2-双亲共聚物复合纳米粒子的合成与紫外光敏特性

用偶联剂乙烯基三乙氧基硅烷改性纳米粒子TiO₂, 应用超声技术将TiO₂ 纳米粒子分散在甲醇介质中, 然后用苯乙烯(ST)原位聚合包封, 再用丙烯酰胺或乙烯基吡咯烷酮(VP)共聚, 两步原位分散聚合得到了有机聚合物为壳、TiO₂为核的有机/无机复合粒子. 用红外光谱、紫外-可见光谱、透射电子显微镜等检测手段进行表征. 结果显示: 由于双亲共聚物对TiO₂纳米粒子的敏化作用, 紫外-可见光谱图上两种纳米复合粒子的最大吸收峰均有明显红移, 并且吸收光谱的范围扩大了, 其中尤以TiO₂/(PST-co-PVP)为甚. 意味着光敏化活性的提高, 特别是在可见光谱的范围内. 这种情形对宽带隙半导体材料如TiO₂纳米粒子的光催化特性是有利的, 表明这类材料的应用空间得到了拓展.     

DNA在纳米金标上的组装、杂交、检测与银增强

利用电化学方法进行DNA的杂交检测.将目标ss-DNA固定在玻碳电极表面, 使其与纳米金标记的互补DNA发生杂化反应, 通过银增强试剂（该种试剂可以使银在纳米金表面沉积, 达到信号增强的效果）在纳米金上沉积银, 形成银包金的核壳结构.在酸性介质中沉积的银被氧化释放, 以离子状态存在于溶液中.用阳极溶出伏安法(ASV)检测银离子从而达到间接检测目标DNA的目的.测定结果表明，ss-DNA的浓度在100～1 000 pmol•L－1 范围内有非常好的线性关系, 检测限为10 pmol•L－1.     

Efficient one‐pot synthesis of water‐compatible and photoresponsive molecularly imprinted polymer nanoparticles by facile RAFT precipitation polymerization

A facile, general, and highly efficient one‐pot approach to obtain azobenzene (azo)‐containing molecularly imprinted polymer (MIP) nanoparticles with photoresponsive template binding and release properties in aqueous media is described, which involves the combined use of hydrophilic macromolecular chain transfer agent‐mediated reversible addition‐fragmentation chain transfer precipitation polymerization and easily available water‐insoluble azo functional monomers. The resulting azo‐containing MIPs were characterized with dynamic laser scattering (DLS), SEM, FTIR, static contact angle and water dispersion studies, and equilibrium binding experiments. They have proven to be nanoparticles (their diameters being around 104–397 nm, as determined by DLS in methanol) with surface‐grafted hydrophilic polymer brushes and exhibit excellent pure water‐compatible template binding properties. Moreover, obvious photoregulated template binding behaviors were observed for such azo‐containing MIP nanoparticles, which led to their largely accelerated template release in the aqueous media under the UV light irradiation. Furthermore, the general applicability of the strategy was also demonstrated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1941–1952     

Dislocation driven chromium precipitation in Fe-9Cr binary alloy: a positron lifetime study

The influence of initial heat treatment on anomalous Cr precipitation within high temperature solubility region of the Fe–9Cr alloy has been investigated using positron lifetime studies. Air-quenched samples with pre-existing dislocations exhibited a distinct annealing stage in positron lifetime between 800 and 1100?K corresponding to Cr-precipitation. During this stage, Transmission Electron Microscopy showed fine precipitates of average size 4 nm, dispersed throughout the sample and from Energy-dispersive X-ray spectroscopy (EDS) analysis they are found to be Cr-enriched. The presence of dislocations is found to be responsible for Cr precipitation.     

Morphology Engineering of Fullerene (C60) Microstructures Featuring Surface Cracks with Enhanced Photoluminescence and Microscopic Recognition Properties

Surface cracks could improve the optical and photoelectronic properties of crystalline materials as they increase specific surface area, but the controlled self-assembly of fullerene (C₆₀) molecules into micro-/nanostructures with surface cracks is still challenging. Herein, we report the morphology engineering of novel C₆₀ microstructures bearing surface cracks for the first time, selecting phenetole and propan-1-ol (NPA) as good and poor solvents, respectively. Our systematic investigations reveal that phenetole molecules initially participate in the formation of the ends of the C₆₀ microstructures, and then NPA molecules are involved in the gradual growth of the sidewalls of the microstructures. Therefore, the surface cracks of C₆₀ microstructures can be finely regulated by adjusting the addition of NPA and the crystallization time. Interestingly, the cracked C₆₀ microstructures show superior photoluminescence properties relative to the smooth microstructures due to the increased specific surface area. In addition, C₆₀ microstructures with wide cracks show preferential recognition of silica particles over C₆₀ particles owing to electrostatic interactions between the negatively charged C₆₀ microstructures and the positively charged silica microparticles. These C₆₀ crystals with surface cracks have potential applications from optoelectronics to biology.     

“蜡烛火焰划分”实验的局限成因分析及改进研究

人教版初中化学首个探究性实验"蜡烛及其燃烧"明确指出火焰的划分方法，但在实际教学中肉眼观察法和火柴梗燃烧法对蜡烛火焰的划分存在一定的局限性。采用文献研究法和实验验证法分析其局限性的成因——燃料的析炭能力强弱、材料结构的不同等，并提出相应的改进建议。     

MASS SPECTROMETRIC FRAGMENTATION OF UNSYMMETRICALLY SUBSTITUTED METHYLPHOSPHONATE DIESTERS

Abstract

A series of structurally related unsymmetrically substituted methylphosphonate diesters have been synthesised and subjected to electron impact (El) mass spectral studies. These studies though aimed at total identification of the compounds, resulted in certain interesting observations and hence are being reported. In order to confirm the observations under electron impact and to support the mechanism of fragmentation we have also performed MSNS experiments in both daughter ion and parent ion modes.     

Use of 2, 3-Butanedione Monoxime for Homogeneous Precipitation of Nickel (II)

Abstract

The solid monoxime of 2, 3-butanedione is a more convenient material than liquid dione for the homogenous generation of DMG. 2, 3-butanedione dioxime. Determinations of Ni in steels and in pure Ni(II) solutions have shown the optimum pH and order of adding reagents. Gravimetric and/or an EDTA titrimetric finish are possible for a method of reliability within ± 0.2 mg of Ni in 50–150 mg Ni. The solid has the same character and filterability as that from the 1960 dione method of Salesin and Gordon¹.     

Nano Silicon from Nano Silica Using Natural Resource (Rha) for Solar Cell Fabrication

Abstract

High purity (～99%) nano silica with an average particle size of ～100 nm was extracted at pH 3 at 650°C from a natural resource, rice husk, using alkaline extraction followed by acid precipitation method. Using nano silica as a precursor, silicon (Si) nanoparticles have been synthesized by high-temperature magnesiothermic reduction method. The prepared sample was characterized by X-ray diffraction, particle size analyzer, Fourier transform infrared spectroscopy, transmission electron microscopy, X-ray fluorescence analyzer, and UV–Vis spectroscopy. The comprehensive characterization studies indicate the pure phase formation of Si and the variation of particle size from 70 nm to 100 nm for samples synthesized at different sintering temperatures. Moreover, the silicon nanoparticles produced at 850°C have pure phase formation, high purity, and good absorption peaks. The efficiency calculated through IV characteristics is found to be increasing in silicon and ruthenium combination (2.67%), which is better than that achieved from the conventional solar cells. The produced silicon nanoparticles could be applied as an anode material for solar cell fabrication.